Parker T6H29C-B08-3R1B-0C000-** Hybrid pumpCombination of fixed displacement vane pump with a variable piston pump Indust. bi-rotational Series T6H29C The hybrid pump is a combination of fixed displacement vane pump combined with a variable piston pump. The cartridges are driven by a common shaft without coupling in between they have a large common suction port and two or three independant outlet ports : One for the piston, one or two for the vane pump. These pumps have very compact displacement and are under all actual pump sizes of the market. Technical Details - Version: Hybrid pump
- Cam ring P1: Capacity (rotating group): 61,9 cm³/U
- Cam ring P2: B08 : Delivery at 0 bar & 1500 r.p.m.: 39,6 l/min
- Type of shaft: 3 =
- Direct. of rotation (view on shaft end): clockwise
- Design letter: B
- Seal class: 1 = S1 BUNA N
- Connection (drain + vent.): ext. drain + UNF thread
- Compensator: C - COMPENSATOR. The “C” pressure compensator control allows the pump to deliver full volume from the outlet port until the pressure rise to the value set by the control. The control then reduces the pump volume to that required by the system mobile maintening the preset pressure at the outlet port.
- Control accessories: 0 = Maxi flow
- Variables flanges connections 4 bolts-SAE (J518c): 0 = UNC thread
- Variables port P2: 1"
- Medien: Petroleum based antiwear R & O fluids. These fluids are the recommended fluids for T6 series pumps. Maximum catalogue ratings and performance data are based on operation with these fluids. These fluids are covered by Denison HF-0 and HF-2 specification.
- Maximum fluid temperature (HF-0, HF-1, HF-2): +100°C
- Maximum fluid temperature (HF-3, HF-4): +50°C
- Maximum fluid temperature (HF-5): +70°C
- Maximum fluid temperature (Biodegradable fluids (esters & rapeseed base): +65°C
- Minimum fluid temperature (HF-0, HF-1, HF-2, HF-5): -18°C
- Minimum fluid temperature (HF-3, HF-4): +10°C
- Minimum fluid temperature (Biodegradable fluids (esters & rapeseed base): -20°C
- Weight: 49 kg
More information: |