Bosch Rexroth AZPF-11-022RAB01MB External gear pump (Код: R918C02325)

Внешний шестеренный насос High Performance Series AZPF
It is the central task of external gear pumps to convert mechanical energy (torque and speed) into hydraulic energy (flow and pressure). To reduce heat losses, Rexroth’s external gear units offer very high efficiencies. They are realized by pressure-dependent gap sealing and highly precise production technology.
Rexroth external gear pumps are built in four frame sizes: Platform B, F, N and G. Within each platform different displacements can be realized by different gear widths. The pumps are available in the versions Standard, High-Performance, SILENCE und SILENCE PLUS. Further configuration variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.
The external gear pump consists essentially of a pair of gear wheels supported in bearing bushes and the housing with a front and a rear cover.


Construction
The drive shaft protrudes from the front cover where it is usually sealed by the shaft seal ring. The bearing forces are absorbed by slide bearings. These are designed for high pressures and have excellent dry-running qualities, especially at low rotational speeds. The gear wheels have 12 teeth. This keeps both flow pulsation and noise emission to a minimum.
The internal sealing of the pressure chambers is achieved by operating pressure-dependent forces. This ensures optimum efficiency. On the outer face, the movable bearing bushes are pressurized with operating pressure and pressed as seals against the gear wheels. Special seals form the boundary of the pressurized zone. The radial sealing at the tips of the gear teeth against the case is provided by smallest possible gaps that are formed pressure-dependent between the gear wheels and the housing.

Consistent high quality based on large-volume production
Long service life
Slide bearings for high loads
Внешний шестеренный насос
High Performance, Platform F
Series: Standard bearing
Version: Phosphatized, pinned
Размер: 022
Direction of rotation: Clockwise
Drive shaft: Straight keyed shaft ISO ø18 mm
Suitable front cover: B
Front cover: Square flange ø80 mm
Line port: Pipe thread ISO 228-1
Уплотнения: NBR
Rear cover: without valve (Standard)