Bosch Rexroth 4WE10D3X/CW230N9K4/V Directional valve (Код: R900923393)

Directional spool valve, direct operated, with solenoid actuation
High-power solenoid
Porting pattern according to ISO 4401-5, NFPA T3.5.1M R1, and ANSI B93.7 D 05
Solenoids with detachable coil
Solenoid coil can be rotated by 90°
The coil can be changed without having to open the pressure-tight chamber


Функция
The directional valve type WE is a solenoid actuated directional spool valve. It controls the start, stop and direction of a flow. The directional valve basically consists of the housing, one or two electronic solenoids, the control spool, and the return springs. In the de-energized condition, the control spool is held in the central position or in the initial position by the return springs (except for version "O"). The control spool is actuated by wet-pin electronic solenoids. The force of electronic solenoid acts via the plunger(5) on the control spool and pushes the latter from its rest position to the required end position. This enables the necessary direction of flow from P to A and B to T or P to B and A to T. When the electronic solenoid is de-energized, the return spring pushes the control spool back to its rest position. A manual override allows for the manual switching of the valve without solenoid energization. To ensure proper functioning, make sure that the pressure chamber of the solenoid is filled with oil.

Технические подробности
4 main ports
Size 10
Symbol D
Component series3X
with spring return
High performance wet-pin solenoid with detachable coil
Напряжение: 230 V AC/DC
with concealed manual override
Electrical connection: Without mating connector; connector DIN EN 175301-803
without throttle insert
Материал уплотнения: FKM
Максимальное рабочее давление: 315 bar
Монтажное положение: any
Максимальный расход: 120 l/min

Рабочее давление макс. (bar):315 bar
Рабочее давление макс. (PSI):4500 PSI
Размер: NG10
Напряжение: 230 V AC/DC